I have a silo and it works perfect for the carts that I have used on it.

That’s between 3.7 and 4.2 watts

I would not recommend any more than 5 watts tops if I had my carts in.

It can be slow and a hard pull at first but once it’s heated it’s fine.

You can also get a woulf mod for around 20 quid and that has a pre heat but that also is button operated. Silo does not have a button as I prefer that type of battery.

Might sound like a stupid question 🙋‍♂️ but are you smoking it like a joint or straight to lungs slow inhale

I’m taking a draw and then another deep inhale after to make sure I’m fully inhaling the THC. I’m used to high wattage, big clouds, direct to lung vaping so honestly unsure whether it’s going straight to my lungs on the first pull or not. I’ve tried both ways and it feels the same.

Everyone is different but I tend to just go straight to lung and hold it without the inhale as you would smoking a joint.

Seems to be the best way to get the best out my carts

Try preheat- run it for 5-6 seconds on the lowest voltage setting then select your normal temp for a hit. I find simply cranking up the voltage just makes me cough.😖
That’s the only issue for me with breath activated kit, no preheat.
I do find the effect of carts reduces for me quite a while before they run out. The early days are the best 😶‍🌫️

My battery is one of them big box mods for ecig and im running disty carts or disty/live resin carts at 10 watts,seems pretty good at that,good vapour and defo getting good hit

Mine is the same. I started at 6 watts and then moved up to 7 watts as I worked that out to be 3V on this coil. Might have to try 10 watts then.

Not much use to you, as I only have a honeystick that goes up to 3.2 v. Need something new as the air flow is a struggle on live resin carts or thicker distillate.
Thinking of trying something buttonless.
I don't think anything under 20v will burn it personally, I have used a higher voltage old battery with Dr Extracts cart - no burn just extremely harsh, concentrates cloud that you pull - rough on the chest but absolutely no impairment.

Not sure if I have a dodgy cart or not? I use a honeystick and have had no problems with other carts but out this in and its flashing that's there no atomizer, if I put another cart in it works fine? Can't see that there woukdnt be enough pull out of the honey stick on high V's for it to work?

Try cleaning the cart base with ISO to ensure a good connection 👍, also preheat if you can because some oils are thicker than others…

Cheers buddy, think it is dodgy as started illuminating slightly yet the vape works fine with other carts. GD sorting out a replacement which I'm obviously incredibly grateful for!!