I usually decarb in 5ml jar around 45min for 230F. Im waiting until there are only a few bubbles then i let it go next 2 minutes and then its done. Im using same method for gummies and carts and it works always fine. But i have only 0.5ml carts due to clogging.
chat
send private message
GreenLDV
send
message sent
joined feb 2025
share GreenLDV and generate bitcoin with reference codes.
3 topics on GreenLDV
13 posts
+25.8 votes
by
GreenLDV
How to decarb live resin for carts? Advice needed!
by
GreenLDV
How to decarb live resin for carts? Advice needed!
So, I’ve just done a little experiment trying to decarb live resin badder to get it ready for a vape cart. Went for a low and slow method I had read about. Not sure how well it worked to be honest. Put it in a little sealed jar in a precise low temp oven. Set at 65c for 48h. Gave the bottle a little shake a few times and popped it back in. Never opened it whilst still warm. Just managed to get most of it out of the jar and into the cart with a glass syringe… slightly frustrating process but got most of it in. Has anyone got some advice or a better method?
This was an experiment as I’m hoping to make rosin carts for myself when I’ve made my press.
This was an experiment as I’m hoping to make rosin carts for myself when I’ve made my press.
Thanks for the response man. What describe there seems to be the standard process. I’ll try that next time. Just had a few blasts on the cart I made and it tastes great. Potent too. So perhaps it worked just fine. Good to try a variety of methods though.
The ideal thing I have found for small batch decarb is the rosin press itself as the temp control is so accurate and you can easily see how it's bubbling.
I read that you were planning on building a press but have you thought about buying one as a donor to upgrade and adapt to your needs as you practice using it.
I read that you were planning on building a press but have you thought about buying one as a donor to upgrade and adapt to your needs as you practice using it.
Ah yes, I had already considered using the press as a heating plate for decarb. Until it’s done I’ve got my little dehydrator.
The thing is that I’m an engineer. A proper one that can actually design AND make stuff. It’s sometimes hard for me to buy stuff when I know I can make it better myself. So I’ve based my design on a very highly regarded pressing cage type design and l will use it in my newly acquired 10ton shop press. I’m going to modify the press so that I can safely tilt it forwards.
I’ve sourced all the materials and have already done half of the machining work. I’ve got a friend who’s going to give me a hand with the temperature controller.
The thing is that I’m an engineer. A proper one that can actually design AND make stuff. It’s sometimes hard for me to buy stuff when I know I can make it better myself. So I’ve based my design on a very highly regarded pressing cage type design and l will use it in my newly acquired 10ton shop press. I’m going to modify the press so that I can safely tilt it forwards.
I’ve sourced all the materials and have already done half of the machining work. I’ve got a friend who’s going to give me a hand with the temperature controller.
My advice:
1. Hotplate is an absolute game changer for decarb. Don't cheap out though - you need to know the temp settings (make sure you don't get a basic "high/medium/low" plate)
2. Keep the glass syringe and flat tip needle hot. This is way easier with a hotplate. As soon as the material touches cold glass or metal it will thicken and/or crystalise and will be hard to get out of the syringe as a result.
Was 65° for 48 hours enough to totally stop the bubbling?
How did the cart pull?
1. Hotplate is an absolute game changer for decarb. Don't cheap out though - you need to know the temp settings (make sure you don't get a basic "high/medium/low" plate)
2. Keep the glass syringe and flat tip needle hot. This is way easier with a hotplate. As soon as the material touches cold glass or metal it will thicken and/or crystalise and will be hard to get out of the syringe as a result.
Was 65° for 48 hours enough to totally stop the bubbling?
How did the cart pull?
Thanks for the response dude. I pre warmed the syringe etc and used a 14g needle. I think the awkwardness was just from doing it for the first time. Good shout on the hot plate but I don’t want to spend money on that just yet as my available funds are going towards the rosin press I’m making.
It turned out that my precise oven was not that precise after checking it with an oven thermometer. It’s almost 10c under. Was 48h enough? Not sure. I’m trying another batch this week and will report back. Really keen on this super low temp approach as I want to preserve all the terps.
All this is a bit a practice before trying to decarb my own rosin.
Nonetheless, the cart pulls well, tastes great and hits hard… it’s pure sativa which I’m having as an alternative to distillate. Had three puffs a couple of hours ago and I’m still feeling the bliss.
What temp and time do you use?
Also, my jar was airtight. Does that make any difference?
It turned out that my precise oven was not that precise after checking it with an oven thermometer. It’s almost 10c under. Was 48h enough? Not sure. I’m trying another batch this week and will report back. Really keen on this super low temp approach as I want to preserve all the terps.
All this is a bit a practice before trying to decarb my own rosin.
Nonetheless, the cart pulls well, tastes great and hits hard… it’s pure sativa which I’m having as an alternative to distillate. Had three puffs a couple of hours ago and I’m still feeling the bliss.
What temp and time do you use?
Also, my jar was airtight. Does that make any difference?
Having decarbed different bho types many times - I have come to understand that the biggest variable is that some material is more stubborn that others.
Some will decarb at 70° for 24 hours no problem.
Some will still not stop bubbling after 48 hours on 95°.
I always go air tight - this will matter very little if you go above 80° tbf though - you can smell the terps escaping even with a tight lid.
I tend to start at 70° then judge the rate of bubbling from that as to whether it needs to be higher or not.
Some will decarb at 70° for 24 hours no problem.
Some will still not stop bubbling after 48 hours on 95°.
I always go air tight - this will matter very little if you go above 80° tbf though - you can smell the terps escaping even with a tight lid.
I tend to start at 70° then judge the rate of bubbling from that as to whether it needs to be higher or not.
Thanks dude. 70* is where I’m going to start with the next batch. Using my new oven thermometer this time. It’s GSC live resin badder. I got a nice 25ml Pyrex media bottle to put it in. I’ll report back.
Look forward to your report.
I got obsessed with decarbing last year and bought a mini centrifuge.
The lesson I learned is don't bother trying to make diamonds and sauce out of sugar wax 🙃
I got obsessed with decarbing last year and bought a mini centrifuge.
The lesson I learned is don't bother trying to make diamonds and sauce out of sugar wax 🙃
I’ve just been eyeing up some very well priced live resin options from Myconauts… very tempted to get some for further experimentation.
This is all part of my quest to be able to make my own rosin carts. I’m building my own press etc. at the moment.
This is all part of my quest to be able to make my own rosin carts. I’m building my own press etc. at the moment.
15 posts
+25 votes
by
GreenLDV
Rosin press recommendations anyone?
by
GreenLDV
Rosin press recommendations anyone?
Hello everyone, I’d really like to get a rosin press for making flower resin 7g at a time. There’s several sites selling them but I’d love to get a recommendation from someone who’s got some experience. My budget is up to £500 as an absolute max.
I’d also value any input into the process etc.
Stay awesome folks!
I’d also value any input into the process etc.
Stay awesome folks!
I have DabPress 10ton with gauge pump for many years, pressed a lot, no issues. Currently for sale, but sadly in EU
The DabPress stuff does look really good. Shame about Brexit otherwise I could be tempted to buy yours. I’d been looking at the stuff from Devil Press which also looks pretty good. Does one really need 10ton? I see quite a few with just 1ton…
The key is enough pressure for the area of the heated plates. So for flower you need to generate atleast 1200psi, and you need area for 2.5' diameter of the rosin bags (4g-20g, up to you how much you will fill it - pre press it everytime for better yield - without heat, ideal with mold)... Short story you need atleast 6-7ton press for pressing bag filled with atleast 4gs of buds. If you need to know something feel free to dm me, happy to help :)
I had before Qnubu, that smaller one (2-5ton? something like that) and the difference in yield and precise after DP 10T purchase was quite shocking. I pressed flower a lot and bubble hash. If you have a chance to test before buy, do it please. You will see the difference on your own :)
Wow just checked amazon is now flooded with budget rosin press machines that sits well within your budget.
I'd recommend you to get a 7-8 ton hydraulic rosin press (£250-450 on amazon) plus some micron bags and you're good to go. Only press the best buds for the best results.
I'd recommend you to get a 7-8 ton hydraulic rosin press (£250-450 on amazon) plus some micron bags and you're good to go. Only press the best buds for the best results.
Thanks pal! I’m a little wary of Amazon to be honest, so much cheap crap on there. I’ll be sure to read all the reviews first!
Amazon's the safest place to buy, they will refund you even for the smallest issues if there's any.
These hydraulic machines look well built with digital display/control. Strongly recommend you get one, at this price point I'd expect (without any research) most of these to be from china-alibaba. But that doesn't mean it won't last you. It's a simple machine that you can build yourself so not that much they can fck up.
A proper hydraulic rosin press like a nugsmasher etc would set you back a couple grand.
I'm actually tempted to get one for myself now lol
These hydraulic machines look well built with digital display/control. Strongly recommend you get one, at this price point I'd expect (without any research) most of these to be from china-alibaba. But that doesn't mean it won't last you. It's a simple machine that you can build yourself so not that much they can fck up.
A proper hydraulic rosin press like a nugsmasher etc would set you back a couple grand.
I'm actually tempted to get one for myself now lol
I had also been tempted to make my own as I have the required skillset and tools… but by the time I’ve sourced the heating plates, temperature control, thermometer etc it actually works out more expensive.
You can diy it cheap, I made one about 10 years ago. For the plates I bought 2x aluminium blocks for about 20-40 quid from ebay and 2x rex-c100 digital PID controllers with ssr under 20 quid find the right size cartridge mold heating element about 5 each. Plus harbrour press can go from 50 - 400.
You can put together a cheap diy press for around 150-500 easy
You'll need to drill the holes into the aluminium block, wire up everything.
You can put together a cheap diy press for around 150-500 easy
You'll need to drill the holes into the aluminium block, wire up everything.
All the mechanical stuff is easy for me, I could even make the arbour press itself if I wanted to… it’s the other electronic components that’ll require some learning. What you’ve written there has already helped me find what I need. Didn’t know what a PID controller was, I do now. Thanks man!
Yes, wiring the PID is the most challanging part. These come with solide state relay (ssr) which "turns" the heating cartridge on/off but still need to buy the heating cartridge seperatly.
So for the plates you need:
2x ex-c100 digital PID controllers with ssr
2x heating cartridges
2x aluminium plates
Need to drill 2 hole in each plate, 1 for the heating cartridge and 1 (ideally threaded) hole for the thermometer.
I used a scaffolding "foot" to attach the top plate to the rod from the press that needed 4 more threaded holes and used high temp instant metal to stick the bottom plate to the platform.
Hope that helps.
I still think the ones from amazon are potentially better than a home made diy press. I only made mine because 10 years ago there was nothing like this available for so cheap.
I'd only recommend you go the diy route if you enjoy doing it and don't mind the time spent on it. With your budget you can get better ones from amazon 100%
So for the plates you need:
2x ex-c100 digital PID controllers with ssr
2x heating cartridges
2x aluminium plates
Need to drill 2 hole in each plate, 1 for the heating cartridge and 1 (ideally threaded) hole for the thermometer.
I used a scaffolding "foot" to attach the top plate to the rod from the press that needed 4 more threaded holes and used high temp instant metal to stick the bottom plate to the platform.
Hope that helps.
I still think the ones from amazon are potentially better than a home made diy press. I only made mine because 10 years ago there was nothing like this available for so cheap.
I'd only recommend you go the diy route if you enjoy doing it and don't mind the time spent on it. With your budget you can get better ones from amazon 100%
I’m quite up for a project. I actually run a machine shop so actually pretty easy for me. Got some material from previous projects that I could use.
What I don’t have in the shop is a press, but I could actually really do with one. So a legitimate work expense.
It really comes down to the cost of the electronics etc. and knowing exactly what to get and then how to wire it together.
So, if I had a detailed shopping list for those parts for under £300 or so and a wiring diagram then I’d be all set to go! And I’m pretty confident that it could be pretty awesome.
What I don’t have in the shop is a press, but I could actually really do with one. So a legitimate work expense.
It really comes down to the cost of the electronics etc. and knowing exactly what to get and then how to wire it together.
So, if I had a detailed shopping list for those parts for under £300 or so and a wiring diagram then I’d be all set to go! And I’m pretty confident that it could be pretty awesome.
This is the list you need for the plates it will cost up to £100 from ebay
2x ex-c100 digital PID controllers with ssr
2x heating cartridges
2x aluminium plates
You can find wiring diagrams online for the ex-c100 they are very commonly used controllers.
Figure out the size of your plates and find the right size heating cartridge should slot in the middle of your plate.
You'll need to build a case for the controllers obviously.
Then pick your preferred press and hack them together. A bottle jack press works but when there's hydraulic available for so cheap I'd just buy that.
2x ex-c100 digital PID controllers with ssr
2x heating cartridges
2x aluminium plates
You can find wiring diagrams online for the ex-c100 they are very commonly used controllers.
Figure out the size of your plates and find the right size heating cartridge should slot in the middle of your plate.
You'll need to build a case for the controllers obviously.
Then pick your preferred press and hack them together. A bottle jack press works but when there's hydraulic available for so cheap I'd just buy that.
10 posts
+15 votes
by
GreenLDV
Live Resin options
by
GreenLDV
Live Resin options
Hey folks, as the subject suggests I’m looking for good live resin options. Currently looking at Canadian Imports but they only have one option… what I’m looking for is choice, quality, consistency and reliability. Any recommendations? Thanks you!
These are the best I have had in a long time and I'm not suprised they are running on 100% 10/10 reviews:
https://littlebiggy.net/item/lsBj0FClU7hLFS4r2wCPatqw/view/p
Part of me wants to GateKeep to myself but heyho, I've done it again lol!
https://littlebiggy.net/item/lsBj0FClU7hLFS4r2wCPatqw/view/p
Part of me wants to GateKeep to myself but heyho, I've done it again lol!
I'm in the same boat as you, all the usual UK based live resin cart suppliers seem to have disappeared or are not carrying stock at the moment.
I've bought a Biscotti LR cart from Canadian imports to try out.
I've bought a Biscotti LR cart from Canadian imports to try out.
Hi guys .we will have new live resins/ crumble /sugar wax and badda available starting from next week check out reviews were not called fire extracts for no reason !🔥🔥🔥
Hi we will have new live resins Badda and crumbles in stock the start of next week check out page and reviews were not called fire extracts for no reason
15 posts by GreenLDV
1 post
+1 votes
Blue Cookies Comp Sat 30th May
Thanks for the competition guys!
$73250
12:40 29/05/26
Blue Cookies Comp Sat 30th May
Hi guys, we're back again with another weekly Comp!
This time for our Top Shelf Blue Cookies
The 8 closest guesses to the BTC Price in dollars $ on Saturday 30th May at 10pm GMT will each win a free 3.5g.
Final entries by Friday @ 10PM
Best of Luck!
This time for our Top Shelf Blue Cookies
The 8 closest guesses to the BTC Price in dollars $ on Saturday 30th May at 10pm GMT will each win a free 3.5g.
Final entries by Friday @ 10PM
Best of Luck!
thanks for the comp mate I'll have a guess at:
$73, 277
(posted 28.05.26 @ 9.45pm)
good luck Biggaz
$73, 277
(posted 28.05.26 @ 9.45pm)
good luck Biggaz
$74,661.09
Is my guess for the Top Shelf Blue Cookies giveaway my FAVORITEEE strain dude if i win ill be so chuffed ive never won a giveaway!! so exited to try your mushroom chocolate :D
Is my guess for the Top Shelf Blue Cookies giveaway my FAVORITEEE strain dude if i win ill be so chuffed ive never won a giveaway!! so exited to try your mushroom chocolate :D
$78901.02 27/5/26 @ 6.08am
(yep, wake n bakin over here :)
Was lucky before with sequential numbers so we'll try this with confidence, thanks Spacemen, send my winnings to my usual haunt thanks 😃
(yep, wake n bakin over here :)
Was lucky before with sequential numbers so we'll try this with confidence, thanks Spacemen, send my winnings to my usual haunt thanks 😃
$78,899 - I am feeling that with the hot weather in the Northern hemisphere there will be a bit of aggro which will make people gravitate to an alternative store of value; many Western governments are increasingly close to a sovereign debt crisis prompting further investments in crypto. But, crucially, I don't expect any fiat defaults in the next week so only a modest upside. I may have overthought this :)
1 post
+1 votes
Super Silver Haze Comp Friday 22nd May
$76,813.10 - 19/05/26 @ 11:05am
Super Silver Haze Comp Friday 22nd May
Hi guys, we're back again with another weekly Comp!
This time for our Best Of British Super Silver Haze
The 8 closest guesses to the BTC Price in dollars $ on Friday 22nd at 10pm GMT will each win a free 3.5g.
Final entries by Thursday @ 10PM
Best of Luck!
This time for our Best Of British Super Silver Haze
The 8 closest guesses to the BTC Price in dollars $ on Friday 22nd at 10pm GMT will each win a free 3.5g.
Final entries by Thursday @ 10PM
Best of Luck!
Another fantastic competition!
The Banana Bread I won last time was marvellous.
Thanks TSM!
$78,550
19-05-26 16.16
The Banana Bread I won last time was marvellous.
Thanks TSM!
$78,550
19-05-26 16.16
Great competition guys , thanks for the opportunity!!
Good luck everyone
My guess is 76,303
Good luck everyone
My guess is 76,303
Thanks for running a WEEKLY comp Spacemen!
I'll be chuffed if I win this one too ;-)
$77,600
06:53 21/05/2026
I'll be chuffed if I win this one too ;-)
$77,600
06:53 21/05/2026
$76,250
Banana bread was a phenom of a smoke 100% hope you have some in stock when i next make a purchase❤️
Banana bread was a phenom of a smoke 100% hope you have some in stock when i next make a purchase❤️
You guys are such legends, I am grateful I spotted this just in time! The Super Silver Haze is so tasty and I'm sure the Banana Bread is equally as beautiful, so thought I'd try my luck and enter with the following prediction for the price of BTC:
$77,867.24
Entry placed on 21/05/2026 @ 21:39
Thank you TSM, extremely generous of you guys to do these competitions! Hell yeah! Wishing everyone the best of luck! 💚🌈
$77,867.24
Entry placed on 21/05/2026 @ 21:39
Thank you TSM, extremely generous of you guys to do these competitions! Hell yeah! Wishing everyone the best of luck! 💚🌈
thanks for the new comp Spacemen
I'll guess $78710.80 (posted 20/05/26 @ 10pm)
good luck Biggaz
I'll guess $78710.80 (posted 20/05/26 @ 10pm)
good luck Biggaz
1 post
+2 votes
I will be back
I’ve missed you dude! Welcome back.
1 post
+1 votes
on
Stoner kid
Substitute for tobacco
I’ve been through this same dilemma a few years ago. At first I used NTB’s, they came in a pack like fags. It’s a mix of herbs and fairly inoffensive.…
on
Stoner kid
Substitute for tobacco
Hey biggas, IV been off tobacco now for 2 years but still smoking abit of green, one thing I do miss is a nice long joint, could anyone recommend a substitute for tobacco as it's expensive smoking blunts and prefer the smoking experience of a j, I've also tried vaping but didn't particularly like it
i know exactly what you mean, gave up fags 10y+ ago now & miss them like a hole in the head - a nice long joint is a different matter though. you can just buy cheap shake to use as a smoking mix or herbs like people have suggested but honestly i think it's actually the buzzy nicotine/weed combination we're really missing so probs no solution for that. i just smoke really small joints of bud, mostly, like americans in old films.
Can second the marshmallow leaf. Doesn't take long to get used to and actually adulterates the terps a lot less. Burns fine but quicker than tobacco cos its dry but its way better on your lungs and makes great zoots.
I was just looking at a pic of Rux's spliff on Budzinho's post and it made nostalgic for spliffs, i need some Notbaccy too, seems the Professor Herb might be the way to go for me!
Ya the few ppl I've talked to about this said professor herb is the best alternative they have had
I have fuck all tolerance, so often will cut with marshmallow leaf to make a j. It is decent.
does that not kill your thc buzz a little bit though? agree with you about tobacco joints, but still not starting up with fags again.
no mate can get diff flavours i use lemon haze does the job but like u say i also just make pure bud joints.
I got my first pack of professor herb today and it's way better than marshmallow leaf etc, best replacement I've tried to so far
Sound redeye just put in an order there for the lemon haze Gunna try that out did you go for a flavoured version or the original?
I use this for hash and it's good enough when you've adapted.
It smoulders away which I like but the ash falls off easily which is annoying.
There's an Irish brand of tobacco free smoking mix cured in honey and fruit juice which I did not get on with, it's like smoking the love child of Old Holborn and Amber Leaf.
This mix is more like Greengo that isn't sold anymore because of tax reasons... stupid tax reasons
It smoulders away which I like but the ash falls off easily which is annoying.
There's an Irish brand of tobacco free smoking mix cured in honey and fruit juice which I did not get on with, it's like smoking the love child of Old Holborn and Amber Leaf.
This mix is more like Greengo that isn't sold anymore because of tax reasons... stupid tax reasons
some old Romany Gypsies I met used Coltsfoot as an alternative I wouldn't know what it is like in a reefer might be worth a try
I’ve been through this same dilemma a few years ago. At first I used NTB’s, they came in a pack like fags. It’s a mix of herbs and fairly inoffensive. But eventually I was just making tiny blunts. Then I gave up combustion completely and got a S&B Mighty +… it’s not the same, it’s just not but I have gotten used to it. It can feel like hard work puffing my through 400mg of flower though. Now if I smoke a blunt it’s like eating an ashtray, so gross! I have really enjoyed live resin carts, they really hit the spot. I think the future is rosin, either dabbing or decarbing for carts. You get the hit of the whole fruit and it’s so convenient in a cart.
Ah, one other thing I tried was camomile straight out of a tea bag, don’t do that, it’s horrible.
Ah, one other thing I tried was camomile straight out of a tea bag, don’t do that, it’s horrible.
This has been an interesting topic to read through the replies. I didn't even know there was a marshmallow plant let alone that a bunch of us were smoking the leaves of it.
I quit tobacco about six months ago now. I moved onto vaping. I've got the Arizer Solo 2 which took a little bit of getting used to but I now prefer it. I also dab extracts through a rig quite a lot as it gets me heavily stoned.
I quit tobacco about six months ago now. I moved onto vaping. I've got the Arizer Solo 2 which took a little bit of getting used to but I now prefer it. I also dab extracts through a rig quite a lot as it gets me heavily stoned.
I've been using a product called real leaf a mix of marshmallow,mullein and raspberry leaves. It's great...smooth no roughness on the exhale
I either buy some low key landrace (Thai etc) or keep hold of a pleasant but weak strain in a jar for a long time, then use that when I want a blunt. Mostly smoke hash worms rolled with it though
I went through a period of using Damiana leaf after talking to a coffee shop owner in Dam and trying it. They banned tobacco in the coffee shops I seem to remember. Not the same as tobacco but quite pleasant.
1 post
+2.2 votes
on
{lb help}
Reviews & Orders Issues For Vendors
I’ve seen these 1/10 reviews with very positive comments quite often. I can see how damaging that is especially when you’re a new seller. Changing the…
on
{lb help}
Reviews & Orders Issues For Vendors
There seem to be some flaws in the current reviews and orders system the way it used to work was much better.
The issue is this: When someone mistakenly leaves a 1/10 review, we used to be able to do a bit of detective work through our recent orders. It would show something like "based on 10 orders" (I can't remember the exact wording), and from that you could narrow down which order the review likely came from by cross referencing which of your buyers had left reviews and matching the numbers.
Now, there's no way to do that. This is going to hurt vendors who have sent out exceptional products but get penalised because a buyer either doesn't understand how the review system works or has simply made a mistake. It ends up reflecting badly on genuine vendors through no fault of their own.
An accidental/mistakenly inputted 1/10 review to a vendor could knock them down a point based on the reputational decimal point system. I really don't think it's fair that this works the way it does.
I hope that makes sense.
The issue is this: When someone mistakenly leaves a 1/10 review, we used to be able to do a bit of detective work through our recent orders. It would show something like "based on 10 orders" (I can't remember the exact wording), and from that you could narrow down which order the review likely came from by cross referencing which of your buyers had left reviews and matching the numbers.
Now, there's no way to do that. This is going to hurt vendors who have sent out exceptional products but get penalised because a buyer either doesn't understand how the review system works or has simply made a mistake. It ends up reflecting badly on genuine vendors through no fault of their own.
An accidental/mistakenly inputted 1/10 review to a vendor could knock them down a point based on the reputational decimal point system. I really don't think it's fair that this works the way it does.
I hope that makes sense.
I’ve seen these 1/10 reviews with very positive comments quite often. I can see how damaging that is especially when you’re a new seller. Changing the layout or wording of the review page would also really help. It needs to be made idiot proof… loads of people probably leave reviews when high which can’t help!
For sure, those that are starting out or don't process many orders will have the worst impact of this.
But 100% worth pointing out so LB can hopefully fix it.
But 100% worth pointing out so LB can hopefully fix it.
Getting traction on LB or even getting noticed on the search bar is hard enough on top of this.
Lucky enough we started up a couple of years ago I think things have changed since then in terms of how you get noticed or seen on the wall.
Try host some promotions, free, competitions get people to nice you. Best of luck.
Try host some promotions, free, competitions get people to nice you. Best of luck.
1 post
+5 votes
on
doctor doc
Healthiest Munchies?
For a low calorie option I nibble chocolate coated rice cakes. Even if you end up eating the whole pack it’s not that bad.
Dried mango, mini fruit pots like pineapple, electrolyte water and a bit of a wild card, homemade blueberry and peanut butter flapjacks.
i really love strawberries or blueberries / ice lollies/ zero sugar drinks or just ice cold water!! always the best
Freeze grapes and they're like a tiny low calorie sorbet in its own case. Black grapes are best, for my tastes at least.
If you happen to own a SodaStream and are feeling particularly *jazzy* - try placing a bunch of them in there. You get fizzy grapes that pop in your mouth. No additives or owt, just c02
I dreamed of owning a Sodastream in the '80s, but, like having a Vienetta even vaguely regularly, that wasn't to be.
I only just realized this year that I'm a grown ass adult with money
Treat yoself, no one else will 😅 these things are way more affordable than you might recall em being
Treat yoself, no one else will 😅 these things are way more affordable than you might recall em being
Yeah, I have had a look a few years ago and they seem to have evolved into basically a fizzy water company now? Back when I was a lad the local Tesco had practically a whole aisle full of different Sodastream syrups made by various manufacturers that were no doubt full of dodgy colourings, flavourings, and various E numbers, but it was a glorious sight to behold. They had evocative names (Witches Brew sticks in my mind), but I was never allowed any of them, apart from one occasion where I got to buy one to take to a friend's house for a sleepover.
Getting older is craving your youth comforts but in sustainable way
I'm even looking into making "healthy fizzy drinks" using a ginger bug for partial fermentation rather than using carbon dioxide!
I'm even looking into making "healthy fizzy drinks" using a ginger bug for partial fermentation rather than using carbon dioxide!
Oh, don't I know it! I have a huge retro game collection (mostly purchased since I started earning money as an adult), and have a couple of the FPGA consoles made by Analogue that reproduce the old hardware to use on modern displays too. Plus, the He-man film is out soon, and the trailer looks amazing! Dripping in nostalgia, and they clearly know full well what they're doing.
Ginger bug? Like something you'd use to make kefir or kombucha?
Ginger bug? Like something you'd use to make kefir or kombucha?
Similar process but without trying to ferment. Just using the method to stay fermenting as that produces c02 as a byproduct
Don't encourage me on nostalgia cos I WILL end up with a retro mortal Kombat arcade unit haha
Don't encourage me on nostalgia cos I WILL end up with a retro mortal Kombat arcade unit haha
That sounds cool. Very natural.
There's a company that makes arcade cabinets in the UK and you can get a really amazing 2 player cabinet with lightguns and a trackerball on it too, and thousands of games built in. Can't remember if you can upgrade to premium parts like Sanwa Denshi, but I think you could. I'd go with one of those for general UK house space constraints. If I lived in the US then a massive room full of old actual arcade cabinets would be amazing. An alternative to the cabinet I mentioned would be to get a JAMMA-compatible cabinet and buy actual JAMMA game boards. That way it takes up a lot let space but is still the fully authentic experience.
There's a company that makes arcade cabinets in the UK and you can get a really amazing 2 player cabinet with lightguns and a trackerball on it too, and thousands of games built in. Can't remember if you can upgrade to premium parts like Sanwa Denshi, but I think you could. I'd go with one of those for general UK house space constraints. If I lived in the US then a massive room full of old actual arcade cabinets would be amazing. An alternative to the cabinet I mentioned would be to get a JAMMA-compatible cabinet and buy actual JAMMA game boards. That way it takes up a lot let space but is still the fully authentic experience.
Fresh fruit like mango and dark chocolate with hazelnuts. No reason a bigga with munchies should feel bad about it if he has a good diet😁
1 post
+2 votes
on
farfan7815
Best Carts on LB
I have had very good distillate carts from Vape Plug and Dr. Terpy. Currently waiting on an order from Canadian Imports.
But, if you want it to hit …
on
farfan7815
Best Carts on LB
Morning All,
Discovered LB only about 2 months now, but have ordered from various Cart suppliers.
Who actually can recommend the best Live Resin Disposables/50-50/shatter Carts on here and any honourable mentions?
Want something that is good quality and is a heavy hitter similar to a spliff.
Also bonus points for flavours that have a stealthier smell as discretion is much needed in my home.
Discovered LB only about 2 months now, but have ordered from various Cart suppliers.
Who actually can recommend the best Live Resin Disposables/50-50/shatter Carts on here and any honourable mentions?
Want something that is good quality and is a heavy hitter similar to a spliff.
Also bonus points for flavours that have a stealthier smell as discretion is much needed in my home.
For me, though carts can hit hard they also generally fade fast and don’t have the depths experienced when using weed, they literally can feel a little hollow. That said there is simply nothing to beat the convenience and stealth of a good cart. The secret is to get the very best quality you can as there are simply too many nefarious ingredients finding their way into your sauce.
Recently, I’ve been enjoying the live resin from Kid Carti which are also incredible value.
Canadian imports simply never let you down and have been supplying some of the best carts on here for years now. I think I’ve said all that can be said about the wonderful unicorn piss! 🦄🌈
Sensi Mart are consistent quality at a very good price.
As a special treat, I’ve just cracked one of the limited editions from Psychonauts. Everything these guys touch is done professionally into a very high standard and their cards are just the same. Not to be missed.
Enjoy👍❤️
Recently, I’ve been enjoying the live resin from Kid Carti which are also incredible value.
Canadian imports simply never let you down and have been supplying some of the best carts on here for years now. I think I’ve said all that can be said about the wonderful unicorn piss! 🦄🌈
Sensi Mart are consistent quality at a very good price.
As a special treat, I’ve just cracked one of the limited editions from Psychonauts. Everything these guys touch is done professionally into a very high standard and their cards are just the same. Not to be missed.
Enjoy👍❤️
What are your thoughts on Canadian Imports Live Resin Carts, I've bought my first one today and it hits significantly differently, for relaxing in the evening I would go Live Resin every day of the week vs Distillate.
Yeah, I think they are very good. The only reason really to stick with distillate is for those on a very tight budget.
I ordered tracked 24. Ordered dispatched Friday and till now it's showing as they are expecting it from sender... I don't know what happening
Oh it 100% should I agree but I’ve had a number of orders arrive whilst the tracking still says its waiting for it🤷♂️
Exactly that was with every order before but this since Frinday is expecting. Something is wrong...
I have had very good distillate carts from Vape Plug and Dr. Terpy. Currently waiting on an order from Canadian Imports.
But, if you want it to hit more like a spliff then you’ll want a live resin cart or at least a 50/50.
The live resin carts from Kid Carti are excellent. 5 big puffs gets me stoned enough.
Distillate is great but it’s not the hit of the whole fruit… and fades pretty fast. Great stuff if you simply need to get through dinner with the in-laws but not so much for a Netflix and chill session.
But, if you want it to hit more like a spliff then you’ll want a live resin cart or at least a 50/50.
The live resin carts from Kid Carti are excellent. 5 big puffs gets me stoned enough.
Distillate is great but it’s not the hit of the whole fruit… and fades pretty fast. Great stuff if you simply need to get through dinner with the in-laws but not so much for a Netflix and chill session.
VapeBoutique had the best LR carts on here by far but they seem to have shut up shop.
The FRYD 2G pens from backwoodsUK are great and the zoor 3G from Poundland are also good but more pricey.
Im waiting on a delivery from KidCarti and hoping it’s as good as the reviews say.
The FRYD 2G pens from backwoodsUK are great and the zoor 3G from Poundland are also good but more pricey.
Im waiting on a delivery from KidCarti and hoping it’s as good as the reviews say.
Our pure gas cake sugar crumble carts have no d9 distillate no Pg or VG and no added fake terps they are 100 percent gas cake crumble decarbed for a very long time at a low temperature and added to high quality full ceramic carts .I think people will struggle to find carts with no additives .all of our products are totally natural
We make our own D9 with natural terps from cali, the only thing is they ain’t in a fancy package but the product is 10/10
Hey
Check our items we have carts, vapes, live resin sugar,edibles and smoke from Grade A to Grade B
RB
Check our items we have carts, vapes, live resin sugar,edibles and smoke from Grade A to Grade B
RB
1 post
+2 votes
Last chance to get orders in before Christmas
Just placed my Christmas order!
Last chance to get orders in before Christmas
Had a little break just to have a little minute to myself
These vapes are the last ones available until around January get them wile they are available my beautiful biggas
I hope everyone is doing ok 💚
These vapes are the last ones available until around January get them wile they are available my beautiful biggas
I hope everyone is doing ok 💚
2 posts
+4 votes
on
Jedi158
Best for sleeping ???
Quite right.
+ 2 more
on
Jedi158
Best for sleeping ???
My Dear Biggaz
With all the knowledge in this community here on LB that I have a lot of faith in as this community grows - I have a question for us old out of touch guys like me -
What is now the best strain or type - ie - Hash, Buds, Oils - specifically for indica sleeping effects. ??
There's so much to choose from thank god !
Thank you for your help - Big Love Biggaz
With all the knowledge in this community here on LB that I have a lot of faith in as this community grows - I have a question for us old out of touch guys like me -
What is now the best strain or type - ie - Hash, Buds, Oils - specifically for indica sleeping effects. ??
There's so much to choose from thank god !
Thank you for your help - Big Love Biggaz
I do think strain effects can vary enormously by individual. Many people don’t even have any faith in this sativa for energy and Indica for relaxing categories. I know I certainly get a buzz from some strains and I get to chill out on others.
A “go to bed” big hitter for me is Canadian imports unicorn piss🦄🌈 that comes in a handy vape. Simply lays me out.🤤😴
A “go to bed” big hitter for me is Canadian imports unicorn piss🦄🌈 that comes in a handy vape. Simply lays me out.🤤😴
Im mega adhd and on a high speed dose, i barely sleep but Dopey has Super Saiyan which clean knocked me out. Some of the best bud Ive smoked for sleep in 30 years
Odins decarb hash is my favourite for putting me to sleep.
Roll it up, pack a bowl/vape, line a blunt or infuse with your hot chocolate before bedtime mate this is the most versatile hash in my opinion, especially as it’s already decarbed.
Roll it up, pack a bowl/vape, line a blunt or infuse with your hot chocolate before bedtime mate this is the most versatile hash in my opinion, especially as it’s already decarbed.
You want to look for an indica bud with dark amber crystals, that means the thc is converting to cbn and cbd, cbn is what you want.
You could try aging it by leaving some bud in a jar for a few months burping the jar to refresh the oxygen every day or two.
Ideally if you could grow your own just let the crystals mature to deep amber and that will be really sleepy
Decarb is also a really good shout as you can consume it in so many ways and it always puts me to sleep.
💚
You could try aging it by leaving some bud in a jar for a few months burping the jar to refresh the oxygen every day or two.
Ideally if you could grow your own just let the crystals mature to deep amber and that will be really sleepy
Decarb is also a really good shout as you can consume it in so many ways and it always puts me to sleep.
💚
I always have a sleepy time strain in the house. Either in the form of hash, flower or a live resin cart. The stains that have been most effective recently are; OG Poison and Gumbo and Yoda OG.
I don’t find distillate carts effective for sleep as it’s just THC and I really need the hit of the whole fruit. So if it’s needs to be a cart then live resin is the way but it needs to be based on a indica strain.
Some vendors have excellent descriptons on their listing but if not then Leafy.com is a great resource.
I don’t find distillate carts effective for sleep as it’s just THC and I really need the hit of the whole fruit. So if it’s needs to be a cart then live resin is the way but it needs to be based on a indica strain.
Some vendors have excellent descriptons on their listing but if not then Leafy.com is a great resource.
I would try adding a g of hash to a teaspoon of cooking oil heat it on the stove untill it boils a bit and mix it all in, add to anything = sleep lots
Going to add this can wreck you a bit depending on the hash. It's quite economical and healthier
Going to add this can wreck you a bit depending on the hash. It's quite economical and healthier
1 post
+3 votes
Here you can see
There is no coil, my carts are the same. Are you using the battery that Kid Carti supplies? Is it charged? Did a light on the bottom flash when you sc…
I just finished work man fucking hell give me a chance 13 chat notifications in less than 2 hours
Give me a break
The coil is built into the bottom you sausage message me privately and I'll help you fix it
They are pure live resin so they need a bit of help getting started not to mention it's pure sugar
Hit it with a lighter gently just to make the liquid inside a little viscos
Pure live resin is like glass
260 other people have figured it out with no problem
Chill you beans
Give me a break
The coil is built into the bottom you sausage message me privately and I'll help you fix it
They are pure live resin so they need a bit of help getting started not to mention it's pure sugar
Hit it with a lighter gently just to make the liquid inside a little viscos
Pure live resin is like glass
260 other people have figured it out with no problem
Chill you beans
I'm not been a dick in saying this I'm all for questions I have no problem with that but this guy has sent me 20+ message saying stuff like I have a really high tolerance I hope they actually do something
Ik there's biggy noobs but they need to realize what there buying and who from
Again 200+ people have figured out these vapes most just pop me a quick question and it's all good
Just vendors be careful who you sell to people show there age
Ik there's biggy noobs but they need to realize what there buying and who from
Again 200+ people have figured out these vapes most just pop me a quick question and it's all good
Just vendors be careful who you sell to people show there age
You need to understand. Your 50 50 is working and your pure is not that's all. I tried lighter and shirts and nothing. Do you think I'm stupid or what? You sold me faulty product. Let's call it by the truth. It's not working. And nothing more from me to say
Man what you trying to do? I tried with lighter and nothing. You don't understand or what? It's not working man. I tried with lighter from any side and nothing and now there is a hole in glass and I cannot do anything. It's not working. That's all am saying. Im sending u private msg but u not answering there
Just wait for dispute if you can even figure that one out
I'm actually fed up
I'm gonna do my postal orders
200 other people figured it out
People aren't liking my topics cause I'm so cool they are liking cause they see your a sausage
I hate the thing vendors be ware but this guy has done my head in
I'm actually fed up
I'm gonna do my postal orders
200 other people figured it out
People aren't liking my topics cause I'm so cool they are liking cause they see your a sausage
I hate the thing vendors be ware but this guy has done my head in
Sod's Law that this is the one that would go wrong huh?.... you could tell when he asked a dozen times if it would hit hard and fired off everywhere when his Friday order hadn't arrived by Monday morning that it wouldn't end well LOL!
Man I'm not gonna dispute you. I want replacement. Im being nice to you and you being sick to me because you have work and all other stuff. I don't care about that man. Im being nice to you so why you are opposite? I want you to send new product as this one is not working and I tried all what you and others mentioned and nothing.
You need to understand how this site works, and a lot more than that apparently!
you can't just spam vendors with messages and topics, they aren't sat here 24/7 waiting to reply to people!
you handled this the wrong way, in every possible way, and now you're stomping your feet like an upset toddler, saying you don't care that this vendor has a job and can't reply to messages?
you should have just waited for a reply in a DM from the vendor, the vendor would have 100% resolved the problem for you amicably but instead, look at the problems YOU have caused now
just 1 look at your posts and profile and it shows your glaring lack of self awareness
I feel so awful for vendors who have to deal with customers like this, they are the minority but they cause enough problems for the lot of us
you can't just spam vendors with messages and topics, they aren't sat here 24/7 waiting to reply to people!
you handled this the wrong way, in every possible way, and now you're stomping your feet like an upset toddler, saying you don't care that this vendor has a job and can't reply to messages?
you should have just waited for a reply in a DM from the vendor, the vendor would have 100% resolved the problem for you amicably but instead, look at the problems YOU have caused now
just 1 look at your posts and profile and it shows your glaring lack of self awareness
I feel so awful for vendors who have to deal with customers like this, they are the minority but they cause enough problems for the lot of us
I appreciate this hesh I'm just going to give him a refund
Nice and fair no problems
Nice and fair no problems
I wanted to receive something that's work that's all. I have nothing against kid carti. I tried to work with the product as I been advised and it didnt work too. Anyway I'm getting a refund and thats all we can do. Im sorry kid carti about the topic and all. I got bit angry. I have nothing against you man. You deserve the best but this one didnt work. It happens. That's all.
Me too man I wish you the best my friend refund is sent I hope you find a nice plug 💚
Bro if u ever get different setup I will buy from you again
I really wanted give you a chance.your 50 50 disti live resin is not bad. Its not best but it's okay to vape during the day. Your pure live resin must be magic unfortunately it didn't work with me. I wish you best too. Im awaiting a refund as it didnt hit my account yet
I really wanted give you a chance.your 50 50 disti live resin is not bad. Its not best but it's okay to vape during the day. Your pure live resin must be magic unfortunately it didn't work with me. I wish you best too. Im awaiting a refund as it didnt hit my account yet
In future, would you like Carti to take a few hits from it to make sure it's working first? It's an electrical product. They can be faulty.
There is no coil, my carts are the same. Are you using the battery that Kid Carti supplies? Is it charged? Did a light on the bottom flash when you screwed in the cart? Does a light come on the bottom when you take a puff?
I use same battery. I put it to charge now but I don't know. Light are on when I take the puff and nothing comes out
The light comes when I take the puff but there is no clouds or vapour nothing. It's just not working. Lights are on
If I may, looking at the pic the cart and battery should be flush there should be no silver showing.
You really commented the same thing 3 times in 3 seperate replies? Lol, I get it, ADHD is a pain, but don't pass it on to the rest of us. Patience.
I actually feel sorry for Carti and other vendors if they have to deal with people like this regularly.
I actually feel sorry for Carti and other vendors if they have to deal with people like this regularly.
The contents of vapes are like honey: when cold, it gets thick and doesn't flow.
So you need to warm it up before you can vape.
Some batteries/vapes have a pre-heat function: you press a button and it warms the coil.
If yours doesn't, you need to do it manually.
Leave it by a radiator/heater for 10 minutes or put it down your pants/under your armpit.
I do recommend you stay away from naked flames though.
So you need to warm it up before you can vape.
Some batteries/vapes have a pre-heat function: you press a button and it warms the coil.
If yours doesn't, you need to do it manually.
Leave it by a radiator/heater for 10 minutes or put it down your pants/under your armpit.
I do recommend you stay away from naked flames though.
Yo mate.have you still got the 'broken' vape?
I know this sounds mad...but..tap it pretty hard on a windowsill or something-so battery down and bounce it a few times...you'll be golden.the wedding cake must be slightly thicker than his orlther previous varieties.
I bet it works
I know this sounds mad...but..tap it pretty hard on a windowsill or something-so battery down and bounce it a few times...you'll be golden.the wedding cake must be slightly thicker than his orlther previous varieties.
I bet it works
1 post
+1 votes
on
Biscuits901
Top sellers for reliability
I’ve been using The Green Team for bud and hash. Their comms are not good at all which I curse them for each time but the stuff always turns up in a f…
on
Biscuits901
Top sellers for reliability
Big shout out to Dopey,real d and the spacemen for delivery on time every time.
Customer service is excellent on all 3 also.
Been on here a while now and these don't ever fail me 👍
Customer service is excellent on all 3 also.
Been on here a while now and these don't ever fail me 👍
My go too is don loco for me perfect menu well priced always good comms and bud is always quality. If your in ireland u should be ordering off him he also lands in 3 days to rural ireland somehow
I’ve been using The Green Team for bud and hash. Their comms are not good at all which I curse them for each time but the stuff always turns up in a fairly timely manner and the quality is good. For carts I use Vapeplug and they are excellent is every way If my latest order from TGT isn’t waiting for me when I arrive home tonight then I think I’m going to jump ship and go to the Spacemen.
Canadian Imports are a sure bet for Biggaz on the vaping side :)
I’d highly advise the gentleman dealers, stay clear of new sellers with less than <100 good reviews as they tend to treat this as their local street. (Was it sent? will you get a reply at all?) but they all write nice fancy posts tricking you.
3 posts
+4 votes
on
{cannabis}
Dry herb vape?
Dude, get the Mighty + or the Crafty. Both are awesome. You can vape hash in them too if you get the capsules with the wee little Brillo pads in them……
+ 3 more
on
{cannabis}
Dry herb vape?
FULL CONFESSION: I normally smoke spliffs full of tobacco, not very medicinal but certainly wherever i’ve been in europe, everyone does it!
I have a MFLB (magic flight launch box) which is a small portable dry herb vape that’s been gathering dust. Been using it again lately, the efficiency and lack of stink is amazing but you can only get small tokes off it so it doesn’t really ‘hit the spot’ like a nice filthy spliff. And i don’t really trust carts/liquids since synthetic cannabinoids are such a big problem here in UK.
Anyone recommend a preferably portable dry herb vape with a bit more power? I got the MFLB like 5 years ago so I imagine the tech’s way better these days.
I have a MFLB (magic flight launch box) which is a small portable dry herb vape that’s been gathering dust. Been using it again lately, the efficiency and lack of stink is amazing but you can only get small tokes off it so it doesn’t really ‘hit the spot’ like a nice filthy spliff. And i don’t really trust carts/liquids since synthetic cannabinoids are such a big problem here in UK.
Anyone recommend a preferably portable dry herb vape with a bit more power? I got the MFLB like 5 years ago so I imagine the tech’s way better these days.
The Mighty is epic imo but very big, bigger in person actually, the Crafty plus is where I’d be going if I were you.
I tried about 3 cheap ones. In the end I invested in a mighty. Worth every penny. Only downside is it's pretty big. I mean it just about fits in my pocket but it's kind of a home use only thing for me. For out and about I use my best cheap one which is a nectar v2. Cost about 60 quid and is small enough to just slip in your pocket next to your phone or wallet but still hits the spot.
You’ll be hard pushed to beat the Storz & Bickel Mighty, I tried not to pay that much but inevitably the road to getting the right thing lead me to it! Buy cheap twice (or three times for me!)
If I need portability the Mighty isn’t too bad but I prefer carts attached to a small 510 battery!
I attach glass to my Mighty with adapters and an Arizer whip which works great, but I have my eye on this beast now! (On the link)
If I need portability the Mighty isn’t too bad but I prefer carts attached to a small 510 battery!
I attach glass to my Mighty with adapters and an Arizer whip which works great, but I have my eye on this beast now! (On the link)
I use a pax at the minute, before that I used the Flower Aura which was only about 50 quid and worth every penny!
I use an arizer solo2 -expensive but amazing . My last one before was a flowermate V5 nano also really good to-great for outdoors as uses discrete pods
Dude, get the Mighty + or the Crafty. Both are awesome. You can vape hash in them too if you get the capsules with the wee little Brillo pads in them… wow it made the b a capital letter… I got the Mighty + over a year ago and I’m very happy with it. Quality is German level so not quite Swiss but still better than anything else. I use a quality 510 cart sourced from here with a Nectar Honeybee for out and about… and to get me through dinner time with four kids.
Edit: just reading through some of the other comments… the Arizer Solo 3 V2 does sound really good. It does the one thing I wish my Mighty did; work whilst charging. The only thing that puts me off is the glass tube that sticks out the top as I would have broken that at least twice by now.
Edit: just reading through some of the other comments… the Arizer Solo 3 V2 does sound really good. It does the one thing I wish my Mighty did; work whilst charging. The only thing that puts me off is the glass tube that sticks out the top as I would have broken that at least twice by now.
I'm using a Boundless CF, which was a lot cheaper than the Crafty, Mighty or Pax3. It works great, I really like how discreet vaping is compared to smoking, but I seem to need to consume double the herb to get the same effect. Is it the same with the Pax or S&B vaporizers?
I found with the MFLB that no matter how much i vaped and reshuffled my herb, I could still smoke it afterwards!
Seems like consensus is leaning towards the mighty (:
Seems like consensus is leaning towards the mighty (:
I have a Pax 3 and Arizer extreme Q with Ddave mods. Both are great. For Pax3 make sure you buy an original one, a lot of fakes out there. The arizer; get the Ddave mod. Vaping is great, but there is a learning curve. A bit like pulling a good espresso. Ones you get it down, it is great and I think a nicer high.
I use a Pax 3. Superb range of temperature controls via bluetooth to your phone. Nice size bowl with different portion size adapters if you prefer a half sized bowl of herb. Good battery life as well. It has a stealth mode which eliminates any vapor smell
I have a pax3 and note it doesn’t work with iPhones anymore as Apple took the app of Istore!!
Don’t even use the thing anymore don’t find it gives me the stoned I am looking for. Excellent for smoking on the go, always fun when someone in the next isle says they can smell weed!
Don’t even use the thing anymore don’t find it gives me the stoned I am looking for. Excellent for smoking on the go, always fun when someone in the next isle says they can smell weed!
As a BIG joint / blunt smoker, previously with baccy no always pure.
I found the dynavap the most joint like. Hold like a joint used lighter.
But a ball ache for heavy user and when you burn yourself, that was enough.
Grabbed a mighty and was great for daily use and fishing. However, must stay on top of cleaning, use kegs for ease of dosing and loading.
Now for home use I got the ruby twist and glass from recommended vape supplies.
This thing hits like a fucking truck with smoke like thick milky clouds that are full of terps!
Will use less and get VERY baked but it’s not portable at all.
Couple of hundred quid for that but same as mighty and kills it 10 times over and is now relegated for fishing
I found the dynavap the most joint like. Hold like a joint used lighter.
But a ball ache for heavy user and when you burn yourself, that was enough.
Grabbed a mighty and was great for daily use and fishing. However, must stay on top of cleaning, use kegs for ease of dosing and loading.
Now for home use I got the ruby twist and glass from recommended vape supplies.
This thing hits like a fucking truck with smoke like thick milky clouds that are full of terps!
Will use less and get VERY baked but it’s not portable at all.
Couple of hundred quid for that but same as mighty and kills it 10 times over and is now relegated for fishing
Might I suggest the Arizer Solo 3? I think it's a touch expensive, but the build quality seems excellent. Out of my DHVs, this is more powerful. In fact, the clouds that you get from it have a similar throat feel to a joint IMHO. I've also an Xmax V3 and a Fog Pro, so I'm able to make a meaningful comparison, I reckon. The vapour path is all glass and it has two oven sizes. The larger of which seems to take around 0.3g, which may address the bowl size issue you were concerned with. The Solo 3 is easy to clean, too. It's a bit bulky, but then that's probably the tradeoff when making a powerful unit like this.
I've had a few higher end dhvs inc mighty plus and I think for cleaning and hit and taste and effects the arizer solo 3 is the best to tick all the boxes, the mighty is a shithouse to clean, arizer just one glass tube in some iso prop alcohol rinse and I'm good to go, I don't even use the gauze
If you're coming from smoke and trying to quit, electronic vapes wont touch it for you IMHO.
If you're not planning to ditch tobacco you'll struggle. If you are, get a Dynavap or more likely a StickyBrick. Same concept as MFLB but neater and easier (dyna) bigger hitter (stickybrick).
Once the tobacco is long gone, electronic vapes become more useful.
My 2c.
If you're not planning to ditch tobacco you'll struggle. If you are, get a Dynavap or more likely a StickyBrick. Same concept as MFLB but neater and easier (dyna) bigger hitter (stickybrick).
Once the tobacco is long gone, electronic vapes become more useful.
My 2c.
I mainly use my Arizer Solo 2, its an absolute workhorse. When with friends who vape, i use the Dynavaps. I still have the odd spliff but 90% of the time im vaping and its the Arizer. .great bit of kit and there might be a few deals soon due to Black Friday events.
I KNOW YOU DONT TRUST E-LIQUIDS DUE TO FAKE CANNABINOIDS BUT TAKE MY WORD FOR IT I SELL REAL THC E - LIQUIDS ONLINE AND OFFLINE UK TO UK FOR GOOD PRICES. COMPARED TO A DRY HERB VAPE THIS IS WAY BETTER. A DRYHERB VAPE WILL RINSE YOUR BUD TILL YOUR BROKE. THESE ELIQUIDS ARE ODOURLESS COMPARED TO THE LITTLE STINK YOU STILL GET FROM DRY VAPES AND LIQUIDS LAST A LOT LONGER!!!!!
https://littlebiggy.org/link/9miuDt
https://littlebiggy.org/link/9miuDt
I got a Pax 2 a couple of months ago. Pretty much all I use now. Was on pipes, bongs & the odd spliff mixed with mallow leaf or cbd flower before. Love the way you can treat it like a spliff & go back to it for puffs. Also my lungs don’t feel so fucked when I go for a run.
No reason for me to use anything else at the moment. Does the trick well. May have a bucket session just to plumb the depths again soon though ;-)
No reason for me to use anything else at the moment. Does the trick well. May have a bucket session just to plumb the depths again soon though ;-)
Have a look for a Flower Aura Vaporiser. They are class. It has a chamber for hash and one for wax too. I'm the same as you. I need a kick in my throat to make up for it not being joint. This definitely does the trick. I have a Pax 2 also. Equally as good but the Flower Aura is about 55 quid :)
bigg topics
